OpenWrt Multi-IP Management and Configuration Guide

Play with soft routing｜Handymanagement of multiple IPs with OpenWrt

Engaged in the network of the old driver know, now rely solely on a fixed IP is not enough. Take friends doing e-commerce, ten or eight accounts operating at the same time is the norm, this time if you do not have a handy multi-IP management tool, minutes to be caught by the platform. Today we will useOpenWrt the soft router godsend!collocationipipgo proxy service, teaches you how to play IP management on the fly.

The dry run in soft routing

First of all, to explain to the white people, soft router is a router system that can be installed various plug-ins, OpenWrt this thing is like Lego blocks, you want to install any function as you like. Here's the kicker - in thenetwork interfaceCreate several new WAN ports, each with a different IP address."Use of Gateway Leap Points"Otherwise the traffic is all crammed into one port.

Here's the kicker: putProxy configuration for ipipgo直接导入到接口设置里。他们家支持HTTP/HTTPS/SOCKS5多协议，不用纠结协议转换的问题。实测动态住宅IP切换时能控制在200ms以内，比某些需要手动刷新的工具强多了。

Smart Scheduling Secrets for IP Pools

Just being able to add IPs isn't good enough, you have to make themdo what one is told. In OpenWrt'sload balancingIn the settings, assign the different WAN ports by weight. It is recommended that theStatic IP for ipipgoSet it as the main channel and dynamic IP as a backup. Their IP pool covers 240+ countries and regions, so you won't panic if you encounter certain cold area needs.

Here's a trick for you: useMWAN3 rulesRealize automatic IP switching. For example, set an e-commerce platform to go with a US residential IP and social media to go with a UK IP. with ipipgo'spinpointing function, picking nodes directly on the map is much less work than manually losing IPs.

Avoid the pit｜Don't step on these mines!

A common mistake newbies make isDNS leak. In OpenWrt's DHCP settings, be sure to check the"Ignore parsed files."The DNS servers are specified manually. ipipgo comes with DNS pollution protection, which is done quite considerately.

There is also a metaphysical problem: sometimes it is clear that the IP has changed, but the site still recognizes the same user. This is the time to checkBrowser Fingerprintingrespond in singingtime zone setting. It is recommended to use it with Privacy Mode and also set the system time zone to match the proxy IP location.

Practical QA｜You must want to ask these questions

Q: What should I do if I keep getting disconnected when switching IPs?
A: Try changing the MTU value from the default 1500 to 1492, especially when dialing with PPPoE. ipipgo's technical documentation has optimization solutions specifically for this.

Q: Will I get stuck with 10 IPs on at the same time?
A: mainly eat the CPU performance of the router. It is recommended to use the x86 architecture of the device, J4125 this level of U with 20 IP easily. ipipgo's API supports batch get proxy, do not have to manually add one by one.

Q: How do I verify if the IP is a real residence?
A: In the terminal, typecurl ifconfig.meLook at the exit IP, then use ipipgo'sIP Detection ToolCheck the ASN type. The ASNs of true residential IPs are carrier codes, and data center IPs can be seen at a glance.

A final word of caution: don't just look at price when choosing an agency service.IP qualityrespond in singingProtocol Support才是关键。像ipipgo这种能做到多协议支持的服务商，用起来确实省心不少。特别是他们家的Long Connection OptimizationThe advantage is obvious when you hang up and download. Well, go ahead and toss your soft router, and remember to make a good backup of your configuration!