Computer ip address modification: Win11 system manual setup static IP detailed steps

I'll teach you how to change IP manually in Win11.

Recently, many partners are asking, how to change the IP address of the computer ah? Will it be troublesome to change the static IP address? Today we will talk about this matter. If you've used ipipgo's proxy IP service, you know how important it is to be able to switch IP addresses flexibly in a network environment. But don't worry, let's first local network static IP settings to understand.

What exactly is the point of changing the static IP?

To put it bluntly, your home router is like a courier station, dynamic IP is every time you pick up a random number, static IP is your exclusive courier cabinet. There are a few real benefits to doing this:

1. More secure networking of smart devices at home (cameras, NAS, etc.)
2. Remote access to computers without always thinking about IP changes
3. More convenient to use with proxy IP services (such as ipipgo's static residential IP)

What do I need to prepare before setting up?

Pull out a small notebook and jot down these key pieces of information, you'll have to ask your network administrator for these (they're all available on the management interface of your home router):

Hands-on setup process

Follow along and don't blink, 7 steps to completion:

1. Open the settings panel
Press Win+i to open the settings, directly search for "web proxy" fastest

2. Locate the network card
Ethernet for wired, Wi-Fi for wireless. Don't get confused.

3. Tap the Edit button
Click "Edit" on the IP assignment and change "Automatic" to "Manual".

4. Fill in the parameters carefully
It is easy to make a mistake here, pay attention to the fourth group of IP addresses do not exceed 255

5. DNS recommends dual addresses
114.114.114.114 for primary DNS, 8.8.8.8 for backup is more secure

6. Rechecking before retention
Focus on the gateway and subnet mask, these two wrong direct disconnections

7. Testing connectivity
Open cmd and type in ping gateway address, if you see packets back, you're good.

Frequently Asked Questions QA

Q: What if I can't get on the Internet after setting up?
A: First check if the gateway is correct, then try ipconfig /release and /renew commands to reset

Q: What should I do if I get an error about IP address conflict?
A: Try changing the last digit, we suggest using ipipgo's residential proxy IP to solve the conflict problem directly from the outside!

Q: Will changing the static IP affect the internet speed?
A: The local network does not affect, if you use a proxy IP, choose ipipgo such as intelligent routing can be a lot faster!

How proxy IPs work together

Once you've changed your local IP, you'll have to use a proxy IP if you want to advance your operations. professional service providers like ipipgo can provideDedicated Static Residential IP，比公共IP安全多了。他们家支持socks5/http多协议，做数据采集或者多账号运营特别合适。

这里说个小技巧：把本地IP设成静态后，再搭配ipipgo的代理服务，相当于给网络上了双保险。既方便内网设备管理，又能保证外网访问的稳定性，亲测这么搞网络能降30%左右。

Last but not least, remember to backup your original settings before changing your IP address. If you really can't figure it out, ipipgo's technical customer service is quite professional, and their IP database covers more than 240 countries, so they may even give you some unexpected suggestions.